Whatsapp ID: +86 13532830851
Email ID
sales@jactonindustry.com
Wechat ID: jactonjackSkype ID: jactonjack
Screw Jacks,Gearboxes,Actuators,Lifting Systems Manufacturers

Products

100 kN Cubic Screw Jacks

100 kN Cubic Screw Jacks Key Features
1. Maximum static load 100 kN or 10 Ton. Maximum dynamic load 60 kN or 6 Ton.
2. Lifting screw sizes Tr 55x9. Customized stroke length.
3. Translating and Rotating Screw configurations, Anti-rotation (keyed) design option.
4. High ratio 9:1, Low ratio 36:1.
5. The 100 kN Cubic Screw Jacks can be connected together in systems so that multiple units can be operated and controlled together.  
6. Manual operation, Electric driven or both together. 


100 kN Cubic Screw Jacks Drawing Dimensions
\

Sample Part Number

JTC100 - US - 300 - H - II - C - PP
100 kN Cubic Screw Jacks Specifications

1. Conditions: 20% running time/60 minutes or 30% running time/10 minutes, 20 °C ambient temperature. Maximum allowable input power 4.5kw, when your selection is exceed the maximum input power, the operational restrictions due to thermal limits. you will need to choose the bigger size screw jacks in order to allow effective heat dissipation. 
2. Nm=input torque required, kW=input power required. 
3. H=high ratio 9:1 (1mm stroke for one input turn), L=slow ratio 36:1 (0.25mm stroke for one input turn).
4. Selection of screw jacks using above figures should only be carried out in consultation with Jacton engineers.
100 kN Cubic Screw Jacks Design and Configurations
* US: Upright configurations, translating screw.
* IS: Inverted configurations, translating screw.

UK: Upright configurations, keyed anti-rotation screw.
IK: Inverted configurations, keyed anti-rotation screw.

UR: Upright configurations, rotating screw with lifting nut.
IR: Inverted configurations, rotating screw with lifting nut.
100 kN Cubic Screw Jacks Stroke
Example: 300 mm stroke, lifting screw travels 300 mm, then we will make the lifting screw length=stroke+housing height+screw end length. All lifting screws stroke is made following your requirements. Special lifting screws design, please consult us!!
100 kN Cubic Screw Jacks Gear Ratios
* H: high gear ratio 1/9, lifting screw travels 1mm per turn of input shafts revolution.
* L: low gear ratio 1/36, lifting screw travels 0.25mm per turn of input shafts revolution.
Customized medium speed ratio 1/18, lifting screw travels 0.5mm per turn of input shafts revolution.
100 kN Cubic Screw Jacks Lifting Screw End Conditions
Standard lifting screw end conditions such as top plate, clevis end, threaded end, plain end, spherical hinge, forked head. Can make lifting screw ends following your required. Before ordering, please send us your special design drawing of lifting screw ends.
100 kN Cubic Screw Jacks Input Shaft Types and Motor Flange Types
Input Shaft Types
* A: left side shaft.
* B: right side shaft.
* C: both sides shaft (double input shafts).

Motor Flange Types
* M1: left side shaft and right side motor flange.
* M2: right side motor flange.
* M3: right side shaft and left side motor flange.
* M4: left side motor flange.
100 kN Cubic Screw Jacks Accessories
Accessories such as protective tube, bellows boots, 3-phase motor, gear reducer, worm gear reducer, motor flange, hand wheel, bevel gearbox, travel limit switches, flexible coupling, connecting shaft, pillow blocks, flange blocks, screw stop nut, jack travelling nut or lifting nut, rod end bearing, safety nut, swivel plate, and trunnion adaptor etc.