Whatsapp ID: +86 13532830851
Email ID
sales@jactonindustry.com
Wechat ID: jactonjackSkype ID: jactonjack
Screw Jacks,Gearboxes,Actuators,Lifting Systems Manufacturers

Products

JTS Screw Jacks Selection Guide


Example Model: (1)JTS50  -  (2)US  -  (3)500  -  (4)H  -  (5)II  -  (6)C  -  (7)PP

(1). Sizes
JTS25, JTS50, JTS100, JTS150, JTS200.
Note: click your required model website directly, there are specifications tables (
bottom position) and assembly drawings for your reference.
 
(2). Configuration and Designs
US = Upright Translating Screw Design     IS = Inverted Translating Screw Design
UK = Upright Keyed Screw Design            IK = Inverted Keyed Screw Design
UR = Upright Rotating Screw Design         IR = Inverted Rotating Screw Design
Note: The screw of a translating screw design jack must be attached to the load (guided) which prevents the screw from rotating. Add linear guides, rails or rolls are recommended.
Note: If your application involves a load which is unattached, unguided or the load is free to rotate and not translate, then a keyed screw design jack are required to prevent trapezoidal screw rotation (not recommended)


(3). Stroke (mm)
There are no standard travel length and all screw jacks travel length are built with customers required. Note: If compressive loads, must consider the lead screw permissible buckling load.

(4). Gear Ratios
Model H:
High Ratio
Stroke (mm),
Per Turn of Input Shaft
L:
Slow Ratio
Stroke (mm),
Per Turn of Input Shaft
JTS25 1/1 6 1/2 3
JTS50 1/1 7 1/2 3.5
JTS100 1/1 12 1/2 6
JTS150 1/1 12 1/2 6
JTS200 1/1 12 1/2 6

(5). Screw End Conditions
Standard lead screw end conditions include I=top plate, II=clevis end, III=plain end, IV=threaded end, VI=fork end, VII=rod end, and no screw end with full threads lead screw.


(6). Worm (Input Shaft) Types & Motor Flange Input Types
A: Single input shaft drive            
B: Inline double shafts drive          
B2: Right angle double shafts drive
C: Three shafts (T) drive            
D: Four shafts drive


(7). Accessories
Screw jacks with a comprehensive range of accessories like FC=Flex couplings, UJ=Universal joints, TUJ=Telescopic universal joints, CS=Connecting shafts, HW=Hand wheels, PB=Pillow blocks, FB=Flange blocks, RE=Rod ends, LSB=Linear shafts and bearings, LGB=Linear guides and bearings, TSC=Telescopic spring covers, BB=Bellows boot, PP=Protection tubes, TAP=Trunnion adapter plates, TMB=Trunnion mounting brackets, MF=Motor flanges, WGR=Worm gear speed reducers, HGR=Helical gear reducers, EM=Single phase or three phase induction motors, STM=Stepper motors, SEM=Servo motors, DCGM=DC geared motors, REN=Rotary encoders, LS=Travel limit switches, FIN=Frequency inverters, PIN=Position indicators, SN=Stop nuts, TN=Travel nuts, SNU=Safety nuts.

Warning:
1. Input RPM should not exceed 1500 RPM.
2. Never exceed the screw jacks static and dynamic capacity.
3. Never exceed the power listed in our screw jacks specification tables. If the maximum power recommendation is exceeded, reduce the speed, use a larger capacity screw jacks, choose another screw jacks ratio, or consider a more efficient screw jack.

Sample Part Number

Bevel Gear Jacks Order Code - US - 300 - H - II - C - PP