Whatsapp / Wechat: +86 135 3283 0851
Email:sales@jactonindustry.com,jactonjack@gmail.com
Phone: +86 769 81585810, Skype: jactonjack

Screw Jacks,Gearboxes,Actuators,Lifting Systems Manufacturers

Solutions

5 Ton Long Travel Upright Rotating Machine Screw Actuators, 1 Inch Acme Screw and Nut For Rail Train Projects

5 Ton Long Travel Upright Rotating Machine Screw Actuators, 1 Inch Acme Screw and Nut For Rail Train Projects. 5 Ton Long Travel Upright Rotating Machine Screw Actuators, 1 Inch Acme Screw and Nut are used on a rail train that conveys 48 of 60kg/m rails of 240 meters long. Offloading takes place two rails at a time. 48 Rails can be offloaded in one day. Offloading of 48 rails can happen up to about four times per week and continue almost whole year long. Working conditions it typically African which can be a combination of most of the following conditions at a time: Outdoor, Dusty, Humid, Seashore/Offshore and Dry. Need double UV resistant bellows boots for lifting screws. Traveling speed is by hand, however maximum travel per turn possible will be important, The maximum outside diameter of hand wheel should not exceed 140mm. Please note that the same hand wheel will be used to turn the 5 Ton Long Travel Upright Rotating Machine Screw Actuators as well as the 1 Inch Acme Screw and Nut. The 5 Ton Long Travel Upright Rotating Machine Screw Actuators will be linked with a rod with 16×16mm squares at both ends. This means that two 5 Ton Long Travel Upright Rotating Machine Screw Actuators work together and will be operated from any side of rail wagon. Acme thread Part of end not threaded at both ends will require diameter 19mm. Thrust bearings at both ends of horizontal screw. Both items require simular ends 16x16mm square x 30 mm long.
\